Description
Bikeman Performance Polaris RZR Pro R BC High Performance Camshafts
Features
-
Multiple revisions and hours spent on the Dyno to get the absolute peak performance but still be reliable with the stock valve train
- No other head upgrades needed
- Stock horsepower makes around 230-235hp at the flywheel
- 270hp with our Torque Link tune and slip on.
- We were able to gain another 30hp with Cams at 8650 rpm's
- 300hp at the crank with Cams, Tune and Slip on exhaust!
Note
- Will not work with Torque link
These steps are different than the service manual. Do not follow service manual steps ***
Steps for starting your Pro R stage 3 and above for the first time.
1. Roll the engine over by hand at least 10 revolutions clockwise when looking at it from the rear.
2. Check Cam timing to make sure it is correct
3. Make sure coolant and oil is at the correct level.
4. Start the engine and hold above 2000rpm until it reaches 170 degrees F.
5. Using the throttle drop rpm 50 rpm per 30 seconds until idle seems unstable.
6. Stay at the unstable rpm until it becomes stable and then repeat step 5.
7. Once the machine is idling at 1450 stable with no throttle input let sit and idle for 10-15 minutes.
8. Your machine is now ready to ride.
9. On higher duration cams it is common to need to give a little throttle to start the vehicle this is completely normal.